Kioti EX45 - Page 44

5 -5 OPERATION
T46O554AT46O553A
T46O502A
2. MAKE SURE THE FUEL COCK IS
IN THE OPEN POSITION.
(1) Fuel Cock
(A) Close (B) Open
(C) Air Bleeding
(1) Forward/Reverse Lever
(2) PTO Switch
(3) Range Gear Shift Lever (Hi-Mid-Lo)
3. PLACE THE PTO CLUTCH LEVER
IN "OFF" POSITION.
4. PLACE THE SPEED CONTROL
PEDAL IN "NEUTRAL" POSITION
(HST TYPE).
5. SHIFT THE FORWARD/REVERSE
LEVER TO NEUTRAL POSITION
(MANUAL TYPE).
NOTE
 The speed control pedal automati-
cally return to neutral when the
operator's foot is released from the
pedal.
6. PLACE THE RANGE GEAR
SHIFT LEVER (HI-MID-LO) IN
"NEUTRAL" POSITION.
(2) PTO Switch
(3) Range Gear Shift Lever (Hi-Mid-Lo)(HST)
(4) Speed Control Pedal
MANUAL Type
HST Type