8
-5TIRES, TREAD AND BALLAST
Weight should be added to the rear
wheels only if it is needed to improve
traction or stability. The amount of
weight should directly correspond to the
job at hand and should be removed
when not needed.
The weight should be added to the rear
wheel weights.
REAR WHEEL WEIGHTS
The rear wheel weights can be attached
to the rear wheel. See your implement
owner's manual for the proper amount
of weight or consult your local KIOTI
dealer.
FRONT END WEIGHTS
Front end weights can be attached to
the front of the tractors frame. You
should consult your implement owner's
manual for the required amount of
weight or contact your local KIOTI
dealer for a recommendation.
REAR BALLAST
BALLAST (OPTION)
FRONT BALLAST
(1) Front End Weights
(2) Rear Wheel Weights
T46O803A
To avoid personal injury:
Additional ballast will be
needed for transporting heavy
implements. When the imple-
ment is raised, drive slowly over
rough ground, regardless of
how much ballast is used.
!!
!!
!
CAUTION
Never overload the tires.
Do not add more weight than is
necessary, or is indicated in
chart.
IMPORTANT
Do not overload tires.
Add no more weight than indi-
cated in chart.
IMPORTANT
Maximum weight
17 kg X 5 Pieces
(187 lbs.)
Maximum weight
per wheel
25 kg X 2 Pieces
(220 lbs.)
To Next Page
Loading...
