A ROPS and CAB should never be
modied by welding, grinding or cut-
ting, as this can weaken the ROPS
structure. If any components of the
ROPS unit are damaged, They must
be replaced.
If the ROPS unit is removed or loos-
ened for any reason, the parts should
be fitted back to their original posi-
tions and all bolts should be properly
torqued.
21. Extra caution should be taken
when driving tractors with narrow
tread widths. For added stability
you should adjust your rear wheel
tread width, see page 4-71.
19. Before starting your tractor you
should depress the clutch and
make sure that all shift levers are
in the neutral position and park-
ing brake is applied.
20. For your safety ROPS
with a
seat belt is recommended for all
applications.
(1) Tread
T66O106a
T66O107a
Always use seat belt when the
tractor is equipped with a ROPS
and CAB. Never use the seat
belt when tractor is not equipped
with a ROPS. (ROPS: Roll-Over
Protective Structures)
•
NOTE
To Next Page
Loading...
