1. It is recommended to use the
creep speed under the following
conditions
• When cultivating a eld deeply or
shallowly
• When it is not possible to work at
the standard speed due to hard
soil
• When transplanting
• When working with a trencher
(agricultural)
• When loading or unloading during
driving
2. It is recommended not to use the
creep speed under the following
conditions
• When getting out of a puddle in
muddy area
• When towing or trailing
• When working with a loader
• When doing public works
3. Precautions for creep speed
• Make sure to shift with the clutch
pedal fully depressed.
• Start moving tractor with the park-
ing brake released. Depress the
brake pedal after disengaging the
clutch to stop the tractor.
Do not stop the tractor with
the brake pedal without de-
pressing the clutch pedal at
the creep speed as rotational
force of the axle has a major
effect at the creep speed.
•
CAUTION
PTO SHIFT LEVER
This lever is to shift the PTO speed
into 2 speeds.
ITEM 1st 2nd
HST 540 -
M
ANUAL 540 540
E
(rpm)
※
540@2.500 (engine rpm)
540E@1.800 (engine rpm)
When you work in light load, use 2nd
PTO stage.
TE1O4B1A
(1) PTO Shift Lever
(A) 540 (B) 540E
To Next Page
Loading...
