To avoid accidents:
Never leave the seat with the
mid PTO in operation. An in-
jury can happen.
Do not install and operate
implements driven by the rear
and mid PTOs at the same
time.
Us
e only approved imple-
ments for the mid PTO.
•
•
•
WARNING
Engine will start with mid PTO
OFF and PTO switch OFF,
shuttle or range shift lever is
in neutral position, brake ped-
al depressed.
•
IMPORTANT
MID PTO LEVER (IF EQUIPPED)
The mid PTO is a unit used for a
lawn mower.
To use the mid PTO, turn on the PTO
main switch, set the rear PTO selection
lever to the 1st gear (540) position and
engage the mid PTO lever.
However, if placing the rear PTO lever
to the 2nd gear (540E) position, the
mid PTO cannot be engaged.
(1) MID PTO Lever
TE1O4B8A
For detailed information, refer to
"Handling Loader" in Chapter 6.
To Next Page
Loading...
