8. Separate the top link from its
bracket and turn it to adjust its
length so that it becomes close to
the upper bracket mounting hole
of the implement. Then, fit it to
the mounting hole, insert the lock
pins, and fix it with the snap pin.
Remove the implement support as
necessary.
(1) Top Link (2) Lock pin
(3) Snap Pin
6. Attach the ball assembly to the
implement.
(1) Lower Link (2)BallAssembly
7. When the lower link is lifted, it is
secured with "click" sound.
(1) Lower Link (2)BallAssembly
A40O614A
A40O615A
A40O616A
To Next Page
Loading...
