to unbalanced hydraulic pressure
in the hydraulic circuit.
7. Up & dump
The boom can be lifted and the
bucket can dump by operating the
joystick lever to the rear right posi-
tion (5 o’clock position). However,
the operation time is may not short-
ened much since the bucket dumps
rst and then the boom is lifted due
to the unbalanced hydraulic pres-
sure in the hydraulic circuit.
8. Locking/unlocking joystick
Make sure to lock the joystick
lever while moving. Otherwise,
its vibration can cause safety
problems, such as falling off
of the implement.
Do not leave the tractor with
the boom off the ground in
any circumstances. If it is nec-
es-sary, lock the joystick.
W
hen the joystick lever is not
in use, lock it since the imple-
ment can fall down if the lever
is operated accidently.
•
•
•
WARNING
Pressing the joystick lock lever in
locks the joystick while pulling it
outward unlocks the joystick as
shown in the gure.
3. Down & roll back
The boom can be lowered and the
bucket can scoop up by operating the
joystick lever to the front left position
(10 o’clock position). However, the
operation time may not be shortened
much since the boom is lowered rst
and then the bucket is rolled back due
to unbalanced hydraulic pressure in
the hydraulic circuit.
5. Down & dump
The boom can be lowered and the
bucket can dump by operating the
joystick lever to the front right posi-
tion (2 o’clock position). However,
these two operations may not be
performed simultaneously due to
unbalanced hydraulic pressure in
the hydraulic circuit.
6. Up & roll back
The boom can be lifted and the
bucket can scoop up by operating
the joystick lever to the rear left
position (7 o’clock position). How-
ever, these two operations may not
be performed simultaneously due
To Next Page
Loading...
