Switch
position
Turning L
amp
2WD Normal turning Lamp OFF
4WD Normal turning
4WD
L
amp ON
The 4WD function can be used un-
der the following conditions:
1. If high traction is needed in a hu-
mid area.
2. When towing a trailer or using a
loader.
3. When working on a sandy surface.
4. When the tractor is pushed out by
reaction from the implement dur-
ing cultivating on a hard surface.
5. When cultivating a eld or driving
over a bank.
To avoid accident:
Engage the switch only when
the vehicle is stationary.
While the 4WD is engaged,
drive the vehicle with low
speed as steering and braking
characteristics may differ.
It is possible to engage the
4WD
during driving. However,
you may hear noise or feel
slight shift impact some at
times in this case. For safe
driving, engage the 4WD when
the tractor is stationary.
The 4WD should not be used
on a paved road as tires can
be worn faster.
•
•
•
•
CAUTION
(1) Cruise PTO Switch
(A) Activation (B) Deactivation
TE1O488B
CRUISE PTO SWITCH
[HST]
Activating the PTO cruise function
during work can keep the PTO speed
constant for enhanced operating
condition.
To Next Page
Loading...
