TE3O435A
TE3O436A
CRUISE CONTROL SWITCH
To activate the cruise control function,
set the desired speed and press the
switch to the “ON” position.
In this case, the speed limit lamp in the
cluster meter.
De
press the HST pedal to increase the
driving speed in order to accelerate at a
c
onstant speed. To deactivate the cruise
function, depress the brake pedal or
press the switch to the “OFF” position.
The cruise function is not activated dur-
ing reverse.
NO STALL SWITCH
This no stall switch is to protect the
engine in case of momentary engine
overload.
In this case, the speed limit lamp in
the cluster meter.
When engine overload occurs
with the NO STALL switch in the
“ON” position, engine load de-
creases to protect the engine.
•
NOTE
Only for loader work. (Never use
for Trailer work)
•
IMPORTANT
To Next Page
Loading...
