EasyManua.ls Logo

Kioti NX5510 - Replacing Air Cleaner Filter (Ad)

Kioti NX5510
266 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
-
35
7
-
34
MAINTENANCENX4510/NX5010/NX5510/NX6010
7
-
35
7
-
34
MAINTENANCENX4510/NX5010/NX5510/NX6010
If the air cleaner is not in a good con-
dition, the lifetime of the engine can
be shortened, excessive soot can be
produced, and the engine power can
be deteriorated. Therefore, the lter
should be inspected frequently. Its
replacement interval can be changed
according to driving conditions. Re-
place the filter according to the fol-
lowing procedure:
(1) Filter (2) Cap
(3) Evacuator Valve
REPLACING AIR CLEANER FIL-
TER (AD)
TE1O719A
1. Open the hood and check the suc-
tion hose and air cleaner housing
for damage.
2. Unscrew the air cleaner clip and
remove the cover.
3. Clean the inside of the air cleaner
housing by blowing compressed
air through it.
4. Replace the filter and check the
housing for damage.
5. Install the cover and x it with the
clip.
When installing the cover, make
sure that the dust collection
valve is heading down.
NOTE
Use only a genuine lter. Use
of a non-recommended filter
can cause damage to the en-
gine and sensor.
Make sure that no dust enters
the system by installing the
cover rmly.
When removing the filter, be
careful not to let foreign mate-
rial enter the air inlet.
CAUTION
TE120(NX4510,5010,5510)CABIN,ROP34 34 2016-04-25 오후 5:50:03

Table of Contents

Related product manuals