Kioti NX5510 - Page 253

9
-
3
9
-
2
TROUBLESHOOTINGNX4510/NX5010/NX5510/NX6010
9
9
-
3
9
-
2
TROUBLESHOOTINGNX4510/NX5010/NX5510/NX6010
caUSE cOUNTERMEaSURES
1. When engine
is difcult to
start

Start motor does not rotate
when key switch is turned

Depress the clutch pedal unless depressed. (Manual type)

Put the PTO switch to the OFF position.

If the switch or start motor is faulty, have it repaired in a workshop.

If any terminal is loose or corroded, clean or x it rmly.
2. When output is
insufcient

Valve out of adjustment

Adjust to proper valve clearance.

Contact to KIOTI dealer.

Air cleaner is dirty

Clean or replace the element at every 100 to 200 hours of operation.

Fuel injection pressure is wrong

Adjust it to 150 to 160 kgf/cm2 or replace the injection nozzle.
3. When color of
exhaust is spe-
cially bad

Fuel is of extremely poor quality

Select good quality fuel.
Temperature Fuel type
- Above -10°C (14°F) NO.2 Diesel
- Below -10°C (14°F) NO.1 Diesel

Nozzle is bad

If necessary, replace with new nozzle.
※
If you do not nd the cause of trouble, consult your dealer for assistance.
TE120(NX4510,5010,5510)CABIN,ROP3 3 2013-11-05 오후 4:31:47