Need help?Do you have a question about the KIP 700 C Series and is the answer not in the manual?
Conditions required for safe and proper installation of the equipment.
Lists types of documents that cannot be legally copied or duplicated.
Details the key features and capabilities of the KIP 700 Series printer.
Technical specifications for the printer, including model, method, and power.
Technical specifications for the scanner function of the MFP model.
Identifies and describes parts visible from the front of the printer.
Identifies and describes parts visible from the left side of the printer.
Identifies and describes parts visible from the right side of the printer.
Identifies and describes parts visible from the rear of the printer.
Lists paper types that should not be used to avoid damaging the print engine.
Provides instructions for proper storage of print media to maintain quality.
Guidance on managing humidity and its impact on print quality and paper.
Specifies dimensions, thickness, shape, and types for standard originals.
Details special document types where image quality and feed reliability are not guaranteed.
Lists original types that can damage the scanner and should not be scanned.
Step-by-step instructions for powering on the printer and initiating the startup sequence.
Procedure for safely shutting down the printer and its controller unit.
Detailed guide on how to load new roll media into the printer's roll decks.
Instructions on how to insert cut sheet paper into the manual feeder.
Steps for adding toner to the printer when the level is low.
Procedure for replacing the waste toner receptacle box when it is full.
Step-by-step guide for performing copying operations using the MFP model.
How to abort or stop ongoing scan or copy jobs using the scan abort button.
Troubleshooting steps for paper jams within the roll deck sections.
Instructions for clearing jams in the media feed and registration areas.
Steps to resolve paper jams in the separation section of the printer.
Procedures for clearing paper jams in the exit section (back and top).
How to remove mis-fed originals from the scanner unit.
Procedure to manually cut and eject media when a door is opened during printing.
Steps to remove or rewind media after an unexpected power interruption.
Ensuring the roll deck is securely closed to clear the 'Deck Open' status.
Ensuring the fuser cover is securely closed to clear the 'Fuser Cover Open' status.
Reinstalling the left side cover to clear the 'Left Side Cover Open' status.
Securing the scanner unit to clear the 'Scanner Feeder Open' status.
Procedure for loading new roll media when the printer indicates 'Out of Media'.
Guidance on supplying toner when the printer indicates 'Toner Empty'.
Procedure for replacing the waste toner receptacle box when 'Waste Cartridge Full'.
Describes how to handle service call errors and contact support.
Instructions for cleaning the exit rollers to maintain print quality.
Steps to clean the scan glass and various feed rollers with appropriate cloths.
Instructions for wiping the upper and lower guide plates with a dry cloth.
Guide for cleaning scanner sensors using a dry cotton bud.
Procedure for cleaning the touch screen display with a dry cloth.
To Next Page
General
