Kipor IG1000 User Manual

24
Smart throttle
Engine speed is kept at idle automatically when the electrical load is disconnected and returns to
the proper speed to match the power of the electrical load when the load is reconnected. This
position is recommended to minimize fuel consumption while in operation.
■ Smart throttle system does not operate effectively if the electrical appliance requires rapid
cycling power.
■ When high electrical loads are connected simultaneously, turn the Smart throttle switch to the
OFF position to reduce voltage fluctuation or shutdown.
■ In DC operation, turn the Smart throttle switch to the OFF position.
OFF:
Smart throttle system does not operate. Engine speed varies with the load.

Kipor IG1000 Specifications

General

Type	Inverter Generator
Rated Output	900 W
Max Output	1000 W
Output Voltage	230 V
Rated Voltage	230 V
Rated Current	3.9 A
Rated Frequency	50 Hz
Fuel	Unleaded gasoline
Starting System	Recoil start
Engine Type	4-stroke
Run Time	4 hours at 100% load
Noise Level	58 dB(A)
Rated Power	0.9 kVA
Max Power	1.0 kVA