Kipor IG6000h - Inspection and Adjustment; Maintenance Schedule; Engine Oil

19
3. INSPECTION AND ADJUSTMENT
3.1 MAINTENANCE SCHEDULE
Regular service period
①
Item perform at every indicated
month or operating hour interval,
whichever comes first
Project
Each use
Each
month or
every 10
hours
Every 3
months
or every
50 hours
Every 6
months or
every 100
hours
Every year
or every
300 hours
Engine Oil
Check
●
Replace ● ●
Air cleaner Check ●
Replace
●②
Spark plug Clean-Adjust ●
Spark Arrestor Clean ●
Valve clearance
Check-Adjust
●**
Fuel tank and filter
Clean
●**
Fuel line
Check
Every 2 years and replace if necessary
③
)
Note:
① Interval operating time in normal troubleshooting.
② When it is used in dusty place, filter should be cleaned every 10 hours or everyday.
③ Maintenance should be carried out by the qualified technicians.
PLEASE READ KIPOR OPERATION MANUAL.
3.2 Engine oil
● Checking the oil level
Stop the engine and check the oil level, be sure to put the engine on a flat floor when checking.
（1）Remove the oil dipstick and check the level.
Lower limit
Upper limit Screw the oil stick tightly,
Then unscrew it .
（2）If the oil level is low, add to the edge of the oil filler port (upper limit).