EasyManua.ls Logo

Kipor KGE2400X - 4. Starting the Generator; Starting Procedure

Kipor KGE2400X
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
4. STARTING THE GENERATOR
(1) Disconnect any load from the AC receptacle
and switch off the AC breaker.
(2) Set the fuel oil valve to “ON” position.
(3). Set the choke lever to “CHOKE” position. 4. Set the engine switch to "ON" position.
5. Pull the starting handle until you feel
resistance then pull it forcefully.
(6). When the engine is warm, set the
choke lever to “OFF” position.
ENGINE SW
ON
OFF

Related product manuals