EasyManua.ls Logo

Kipor KGE2400X - DC Receptacle Operation

Kipor KGE2400X
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
2. Start the generator.
The DC receptacle may be used while AC power is in use.
The DC receptacle is protected from an overload with a fuse. If the DC circuit is overloaded, the 5
amp fuse will blow and power to the DC receptacle will cease. The red light on the DC panel will
illuminate. Replace the fuse with one of the same capacity. Using a higher rated fuse may cause
damage to the generator alternator.

Related product manuals