Kipor KGE2500X - Storage; Troubleshooting

8. STORAGE
2. Remove the filler cap and drain
screw plug, then drain off the
engine oil.
9. TROUBLESHOOTING
1. The generating set cannot start.
1. Remove the drain screw plug and
drain out gasoline from the carburetor.
3. Reassembly the drain
screw plug.
4. Untill the high limit of the filler
cap.
5. Pull out the starting handle
slowly untill you feel resistance.
2. Whether the engine switch is in
OFF position?
3. Check engine oil level. 4. Check fuel oil level.
5. Dismount the spark plug.
6. Check the spark plug.
(X/E Type) (C/L Type)
(X Type) (E Type)
----