7.1 CHANGING OIL
Drain the oil while the engine is still warm to assure rapid and complete draining.
•
Make sure the engine / starter switch and the fuel tap is OFF before draining oil.
Step 1.
Remove the oil filler dipstick.
Step 2.
Remove oil drain plug and drain all used dirty oil into a container.
Step 3.
Refit oil drain plug and tighten securely.
Step 4.
Refill with the recommended SAE10W/30 Grade Oil and check the oil level.
Step 5
. Re-install oil filler dipstick and tighten securely.
Engine Oil Capacity:
KGE2500X 0.6Lt
KGE4000X 1.1Lt
KGE6500X/E 1.1Lt
•
Please dispose of used engine oil in a manner that is compatible with the environment. We
suggest you take it in a sealed container to your local recycling centre. Do not throw it in the
rubbish or pour it on the ground.
16
Drain Plug
To Next Page
Loading...
