1
1
0
0
2
2
.
.
5
5
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
w
w
a
a
r
r
n
n
i
i
n
n
g
g
s
s
1. Carry out maintenance on firm, level surface, preferably with engine
off and one track blocked.
2. In case of maintenance with the engine running, watch out and reduce
to the minimum the time you will spend indoor.
3. During each maintenance phase, users must wear PPE (gloves,
overalls, safety footwear).
4. Tools used for maintenance must be appropriate and of good quality.
5. Always keep clear from dirt and wet the area for maintenance, above all
from oil stains.
6. Do not allow the machine to be operated if users are under 18.
7. Never put arms and fingers in the machine openings.
8. Do not use gasoline or flammable solvents such as detergents, always
use non inflammable / non toxic solvents
9. Limit the use of compressed air (max 2 bars), always protect eyes with
side-shields glasses for wrap-around protection
10. Never use open flames to light the area in case of inspections and
maintenance.
11. After any maintenace or adjustments keep tools or other parts away
from machine moving parts to avoid damage and/or injuries to users.
To Next Page
Loading...