• 9. The designing of wiring for components and connectors is more
reasonable which contributes to a lower failure rate on KP310 panel than
KI panel.
• 10. KP310 panel with ATS connector,which could be connected directly
with a new ATS that can realize the remote control for screen, on which
the mains and genset voltage could be monitored, along with
AMF(automatic management failure) alarm. This new ATS could work
from the genset farther than the distance limit between 30 and 50 meters
for previous one.
• 11. KP310 could be connected with PC by RS232 serial port.
To Next Page
Loading...