EasyManua.ls Logo

Kipor SINEMASTER IG1000 - STARTING THE ENGINE; Set Engine Switch to ON; Adjust Choke to START

Kipor SINEMASTER IG1000
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
3. Check the air cleaner
Check the air cleaner element to be sure it is clean and in good condition.
Loosen the cover screw and remove the left side maintenance cover.
Press the latch tab on the top of the air cleaner body, remove the air cleaner cover, check the
element. Clean or replace the element if necessary.
Never run the engine without the air cleaner. Rapid engine wear will result from contaminants,
such as dust and dirt, being drawn through the carburetor, into the engine.
CARBON CANISTER
MAINTENANCE COVER
MAINTENANCE COVER
SCREW
AIR CLEANER BODY
AIR CLEANER COVER
AIR CLEANER
COVER SCREW
AIR CLEANER ELEMENTS

Related product manuals