EasyManua.ls Logo

Kipor SINEMASTER IG1000 - Changing Engine Oil

Kipor SINEMASTER IG1000
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
1. CHANGING OIL
Drain the oil while the engine is still warm to assure rapid and complete draining.
Make sure to turn the engine switch and the fuel cap vent lever OFF before draining.
1. Loosen the cover screw and remove the left side maintenance cover.
2. Remove the oil filler cap.
3. Drain dirty oil into a container thoroughly.
4. Refill with the recommended oil, and check the oil level.
5. Reinstall the left side maintenance cover and tighten the cover screw securely.
Engine oil capacity: 0.42 qt. (0.4L)
Please dispose of used motor oil in a manner that is compatible with the environment and
local disposal regulations. Do not throw it in the trash or pour it on the ground.
MAINTENANCE
COVER
MAINTENANCE
COVER SCREW
OIL FILLER CAP
OIL FILLER HOLE
UPPER LEVEL

Related product manuals