EasyManua.ls Logo

Kipor Sinemaster IG6000 - High Altitude Operation

Kipor Sinemaster IG6000
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Choke knob
Fig.10 Choke knob opening view
4.5 Push the choke knob to the OPEN position as the engine warms
up, see Fig.10.
High altitude operation
At high altitude, the standard carburetor air-fuel mixture will be excessively rich.
Performance will decrease, and fuel consumption will increase.
High altitude performance can be improved by installing a smaller diameter main
fuel jet in the carburetor and readjusting the pilot screws. If you always operate
the generator at altitudes higher than 1,500 m (5,000 feet)above sea level, have
your authorized dealer perform these carburetor modifications.
Even with suitable carburetor jetting, engine horsepower will decrease approximately
3.5% for each 305m (1,000 feet) increase in altitude. The effect of altitude on the
horsepower will be greater than this if no carburetor modification is made.
CAUTION
Operation of the generator at an altitude lower than the carburetor is jetted
for may result in reduced performance,overheating, and serious engine
damage caused by an excessively lean air/fuel mixture.
-10-
-11-
OFF
ON
START
Engine switch
OFF
ON
START
Engine switch
Fig.9 Starter motor scheme
4.3 Insert the engine key, and turn the engine switch to on position, see Fig.8.
Fig.8 Start the knob view
4.4 Turn the engine switch to the START until the engine has started, see Fig.9.

Other manuals for Kipor Sinemaster IG6000

Related product manuals