Kirby Ultimate G Series User Manual

44
The Kirby Company
CLEANINGTHEZIPPBRUSH
To clean the Zippbrush, press the button on the front
of the brush to release the outer brush ring.
When pressing the release button, avoid placing
pressure on the outer ring brush. ➤
LiftthecenterBrush/AirTurbineoutofthetooland
remove any particles or lint from the brush and turbine.
Also remove any particles left in the tool cavity. ➤
PlacetheBrush/AirTurbinebackinthetoolandturnit
untilthetabsdropintotheslots.Hookthetabonthe
rear of the ring brush into the small opening of the tool
and snap it back into place. ❏
Optional Accessories
Optional Accessories
The Zippbrush
™
(continued)
CAUTION:
While using the Zippbrush, do not insert fingers into the revolving brush
area or push the release button while the brush is in motion. Keep brush
flat against the surface being cleaned as the brush can throw particles
outward. Do not use on delicate fabrics.
1
2
3
!

Kirby Ultimate G Series Specifications

General

Type	Upright
Power Source	Corded Electric
Filtration	HEPA
Weight	23 lbs
Bagless	No
Attachments	Crevice tool, upholstery tool, dusting brush
Features	LED headlight
Warranty	3 years