Kirisun PT8200 - Programmable Button Function

6 of 12 2008-6-2
operation, see “Menu Operation”.
26. Call Button 1 As set, transmit the preset code.
27. Call Button 2 As set, transmit the preset code.
28. Call Button 3 As set, transmit the preset code.
29. Call Button 4 As set, transmit the preset code.
30. Menu Selection/Enter
Press this button to activate the menu mode. Entering the menu mode, press
this button to select and save the items in the menu.
31. Speaker Alarm
Start/close the speaker function. After you press this button, the speaker
function will be started. If the radio receives the matched dual-tone/two-tone
multi-frequency code, it will give a warning sound. Press this button again and
this function will be closed.
32. Lease Time View Press this button and the LCD will show the remained time of current lease.
33. Independent Operation Start/close the independent operation function.
34. Scan List Edit
Press this button and the radio will enter the fast menu mode for scan list edit.
For details, see “Menu Operation”.
35. GPS Information View
Press this button and the radio will enter the menu mode of GPS Information
Menu.
36. VOX Level Selection
Press this button to enter the VOX Level Adjustment Mode”. Press /
button to adjust VOX level. Press button to save the selected VOX
level and quit this mode.
Monitoring/Hook Detection: select the hook function or start the monitoring function of desk
microphone.
５. Intercom Call
５.1 Selective Call
５.2 Send Selective Call
A. Press “Menu Selection/Enter” button to enter the menu mode.
B. Press
/ button until “RADIOCAL”.
C. Press
button to select “SEL CALL”.
D. Press
/ button until the required call list appears.
E. Press “PTT” button to send the selective call.
F. Press “PTT” button and speak to the microphone in normal voice. Please keep the microphone
about 3 to 4 cm far from your mouth. After speaking, please loosen the “PTT”.
G. Press
button to return to the previous operation.
５.３Receive Selective Call
Receiving a selective call, you will hear the prompt tone and find the orange indicator flickers.
icon flickers and the calling party’s ID code or name displays.
Press PPT button for callback.
５.４Call Prompt
After the radio receives the call prompt, the prompt tone will sound and the orange indicator flicker.
icon flickers and the calling party’s ID code or name shows until someone answers. Press the
“PTT” button for callback or other buttons for cancellation.
A. Press “Menu Selection/Enter” button to enter the menu mode.
B. Press
/ button until “RADIOCAL”.
C. Press
button to select “CALL ALT”.
D. Press
/ button until the required call list shows.