Kirisun PT8200 - 6 Select Group; 7 Talkaround; 8 Applied Items

7 of 12 2008-6-2
E. Press “PTT” button to utter the selective call.
F. After calling, press
button to return the previous operation.
6. Select Group
According to the setup of the communication network, the vehicle mounted radio can be distributed
to different groups. Select the proper group to realize calling with the vehicle mounted radio of
different groups.
1. Select the group through menu.
A. Press the “Menu Selection/Enter” button to enter the menu mode.
B. Press
/ button until “ZONE”.
C. Press
button for selection.
D. Press
/ button until the group name you require appears.
E. Press
button for selection.
2. Select the group through “GROUP UP” or “GROUP DOWN”.
7. Talkaround
In the communication network, you can expand communication range through the repeater, but
when the vehicle mounted radio is out of the communication range, you can connect with other
radio in the talkaround method. The talkaround function can show through
.
1. Select the group through menu.
A. Press the “Menu Selection/Enter” button to enter the menu mode.
B. Press
/ button until “RPTRTALK”.
C. 按
选择 Press button for selection.
D. Press
/ button until “REPEATE” or “TALKRND”.
E. Press
button for confirmation.
2. Switch the talkaround or repeater mode through “talkaround”.
8. Applied Items
The applied item can help you customize some setups of the radio.
Operating steps as follows:
A. Press the “Menu Selection/Enter” button to enter the menu mode.
B. Press
/ button until “UTILITY”.
C. Press
button for selection.
D. Press
/ button until the items you require show.
E. Press
button for confirmation. The radio will show the current setup.
F. Press
/ button to show all items that can be set with this item.
G. Press
button to select this setup.
H. Press
button to return to the previous operation.
Change the setup items in the following table as per the previous steps.
Items Selectable Setups Functions
Squelch Level
"SQL LEV "
SQL 0 ~ 9 Change the squelch level of the radio.
Transmission Power
"PWR LEV "
"PWR LOW "
"PWR MID ",
"PWR HI "
Select among high, medium and low transmission
power.
VOX Level VOX 0 ~ 9 Change the VOX level of the radio.