Kirisun TR850 - Page 32

TR850 Service Manual
23 Program_IN_5
Digital Input
High level active Opening
squelch when connected
with Pin20
Digital Input:
(2.5V<VIH<5V,0V<VIL<0.4V)
24
Program_Out_9
(Ext_Alarm)
Reserved -
25 Aux_Audio_Out1 NULL -
26 Aux_Audio_Out2 NULL -
4. Function and Parameter Setting
4.1. Conventional Functions
Conventional DMR functions:
 Supports DMR dual slot mode
 Supports DMR private call, group calla and all call transfer
 Supports short Message, status message transfer
 Supports end to end voice and data encryption
 Supports GPS
 Supports interruption and monitor function
 Supports stun, activation, kill signaling transfer
 Supports IP connection
 Supports Standard AIS Interface
 Support Analog and Digital Mode
 Supports Pseudo Trunking
4.2. Parameter Setting
Repeater is set with default parameters when leaving the factory. Parameters such as operation frequency,
channel paramenters, scan and encryption may be changed according to different requirement by
users.Therefore, Kirisun specially designed programmable software CPSp, which is interface-friendly,
easy to operate and display-friendly, to realize the setting for repeater function parameters.
28