Kirloskar Electric BPC955 V0 User Manual

BPC955V0 User Manual
EMS955V0 AMF CONTROLLER1.doc Page 17 of 19 8/06/2011
Message Function description
Stop Fail
The engine has failed to stop.
Check stop solenoid, check rack operation.
Belt Broken
If the belt break detector has been activated.
Check the belts
Oil-P Fault
The Oil Pressure sensor system is not functioning as expected.
Check oil pressure sensor and associated wiring.
Oil-T Fault
The Oil Temperature sensor system is not functioning as expected.
Check oil temperature sensor and associated wiring.
Eng-T Fault
The Engine Temperature Sensor is not functioning as expected.
Check engine temperature sensor and associated wiring.
Can-T Fault
The Canopy Temperature Sensor is not functioning as expected.
Check the canopy temperature sensor and associated wiring.
Fuel-L Fault
The Fuel Level Sensor is not functioning as expected.
Check the Fuel Level Sensor and associated wiring.
Speed Fault
The Speed Sensing system is not working as expected.
Check the associated speed sensor wiring and external influences such as
poorly operating battery chargers and poorly filtered UPS systems connect
to the load.
Speed Detected
Speed signal is unexpectedly present.
Check the associated speed sensor wiring and external influences such as
poorly operating battery chargers and poorly filtered UPS systems
connected to the load. Check electrical safety earthing systems. Check
associated communications networks are isolated and not part of an
unexpected earth loop.
Oil Detected
Oil Pressure is unexpectedly present.
Check the Oil Pressure Sensors and associated wiring.
Check the Oil filter system is not blocked.
Check the engine is not running with a failed speed sensing system.
E-S Lock-out
The emergency stop input has been activated. Deactivate the emergency
stop input, then press the stop button to clear this alarm.
Can Door
The canopy door input has been activated and the canopy door
unexpectedly open
Fire Alarm
The Fire Alarm input has been activated. The genset will be shutdown as
an emergency stop. Investigate the source of the alarm then press the
stop button to clear this alarm
Alarms are indicated by fast flashing of the alarm LED and displaying the appropriate message on the LCD.
Message Function description
Oil Pressure Low
The oil pressure went below the alarm setpoint while running.
Check oil level and replenish. Check for blocked oil filter.

Kirloskar Electric BPC955 V0 Specifications

General

Brand	Kirloskar Electric
Model	BPC955 V0
Category	Controller
Language	English