KIRLOSKAR KMW Univator - MACHINE SPECIFICATION

UNIVATOR MANUAL
1.2 MACHINE SPECIFICATION
1.0
Note - All models of Univator can be used for tractor PTO RPM of 540/1000. Customer should
indicate the PTO RPM of the Tractor, for Selection of rotor speed through change gears in
Gearbox. Indicated weight of machine may vary by +/- 5 %.
*In view of our policy of continuous improvement, we reserve the right to alter specification
or design without prior notice and without liability. The features shown do not necessarily
show the machine / equipment in its standard form. (E & OE)
Basic Specifications*
Univator Model Cutting Length Width Height Weight Blades Power
Width (mm) (mm) (mm) (Kg) (Nos) (HP)
KMW 1500 L 1516 1650 990 980 355* 36 40+
KMW 1600 L 1616 1769 837 950 364 36 40+
KMW 1800 L 1816 1969 830 950 387 42 45+
KMW 1500 H 1516 1650 990 980 380 36 40+
KMW 1600 H 1616 1777 837 963 385 36 40+
KMW 1800 H 1816 1969 830 950 424 42 45+
KMW 2100 H 2116 2268 836 956 470 48 55+
Image: A
06
Height
LengthWidth