GROUNDING INSTRUCTIONS
This appliance must be grounded while in use to protect the
operator from electrical shock. The appliance is equipped with
a 3-conductor cord and 3-prong grounding-type receptacle. The
appliance has a plug that looks like sketch A in Figure 73.1. The
adaptor in sketch B should be used for connecting sketch-A
plugs to two-prong receptacles. The grounding tab, which
extends from the adaptor, must be connected to a permanent
ground such as a properly grounded outlet box as shown in
sketch C using a metal screw.
EXTENSION CORDS
Use only 3-wire extension cords which have 3-prong ground-type
plugs and 3-pole cord connectors that accept the plug
from the appliance. Use only extension cords which are intended
for outdoor use. These extension cords are identified by a marking
"suitable for use with outdoor appliances: store indoors while not
in use." Use only extension cords having an electrical rating not
less than the rating of the appliance. Do not use damaged
extension cords. Examine extension cord before using and replace
if damaged. Do not abuse extension cord and do not yank on any
cord to disconnect; keep cord away from heat and sharp edges.
5 6
To Previous Page
Loading...