ASSEMBLING THE ESPRESSO MACHINE
3
Tip the water tank slightly, then
remove by pulling the water tank
out from the Espresso Machine.
4
Wash the water tank in hot, soapy
water and rinse with clean water. Dry
with a soft cloth. The water tank cannot
be washed in the dishwasher.
6
Place the water tank back on the
Espresso Machine.
5
Fill the water tank with fresh, cold,
drinking water (the water level should
be at or below the “max” fill line).
NOTE: Press water tank in until it snaps completely into place to assure proper function.
7
Before brewing espresso for the first
time, make sure to run plain water
through the Espresso Machine, on the
“lungo” setting three times.
x 3
W10768769B_v04.indd 13 6/30/15 3:17 PM
To Next Page