Before using your Citrus
Press Accessory for the first
time, wash the strainer basket
and cone either by hand or
in the dishwasher (see “Care
and Cleaning” section).
− All parts of the Citrus Press Accessory
are dishwasher safe.
− If washing the parts by hand, avoid the
use of abrasive cleaners or scouring pads.
− Dry thoroughly after washing.
Disassembled parts should be
stored in a location out of the
reach of children.
For use with the 3.1 L Food Processor (5KFP1335)
Use the Citrus Press Accessory to juice your favorite
fresh citrus fruits.
1. Place the citrus press adapter on the
power shaft.
2. Place the strainer basket in the work
bowl with the locking clip positioned
to the left of the work bowl handle.
3. Turn the basket counter-clockwise
until the clip locks into the handle.
4. Place the cone inside the strainer
basket, over the power shaft. It
may be necessary to rotate the
cone until it falls into place.
© 2013. All rights reserved.
Specications subject to change without notice.
2 years full warranty from the date
of purchase.
For all product related questions and
after-sales matters, please refer to the
Use and Care Guide provided with
your Food Processor.
CITRUS PRESS ACCESSORY INSTRUCTIONS
Before using the Citrus Press Accessory
Installing the Citrus Press Accessory
Care and cleaning
Warranty
Using the Citrus Press Accessory
1. Cut the citrus fruit in half, then place one
half on the cone, cut part facing down,
keeping it pressed firmly to the cone
with your hands.
2. Press the Speed 1 button.
3. Press the “O” Off button when
all juice is extracted. Repeat with
remaining fruit.
W10532515A_ENv3.indd 3 1/30/13 9:02 AM
To Next Page
Loading...
