THIS SERVICE POINTER APPLIES TO THE FOLLOWING BRANDS:
REFRIGERATION PRODUCTS KITCHEN PRODUCTSLAUNDRY PRODUCTS
R4317440
December 2008
ALL POINTERS ONLINE: http://www.servicematters.com/tech_ref/tech_ref_main.htm
To receive pointers by email, or to edit or delete a current email address, FAX changes to 269-923-5805.
CUSTOMER CONCERN:
The gap between the freezer drawer and refrigerator door(s) is not even. See gure 1.
1. Check that the unit is level.Adjust if necessary.
2. Check that the RC door(s) are aligned. Adjust if necessary.
3. If the gap is still uneven, tighten the four freezer drawer bolts
and four freezer basket screws and recheck. See gures 2 and 3.
Jenn-Air and KitchenAid
Bottom Freezer Built-In Refrigerators
Models:
JB36SEFXLB00 KBRC36FTS03 KBLS36FTX02 KBLO36FTX03 KBF042FTS02
JB36SEFXRB00 KBRC36FTS02 KBRS36FTX00 KBLO36FTX02 KBF042FTX02
JB36SEFXLB00 KBLC36FTS00 KBRS36FTX03 KBLO36FTX00 KBF042FTX00
JB36PPFXRB00 KBLC36FTS03 KBRS36FTX02 KBFC42FSS00 JF42SEFXDB00
JB36CXFXLB00 KBLC36FTS02 KBRO36FTX03 KBFC42FST00 JF42CXFXDB00
JB36CXFXRB00 KBLS36FTX00 KBRO36FTX02 KBFC42FTS03 JF42PPFXDB00
KBRC36FTS00 KBLS36FTX03 KBRO36FTX00 KBF042FTX03
Figure 3
Four Basket
Screws
Figure 2
Drawer Bolts
CORRECTION PROCEDURE
Figure 1