KitchenAid KFC3510 - Assembling and Running the Food Chopper

6
PRODUCT USAGE
Be sure the Food Chopper is unplugged.
1
Start with the Work Bowl Handle facing
front on the Base. Rotate the handle
90° counterclockwise to lock into place.
When assembled properly, the handle will
face the right side.
2
Fit the Blade over the shaft in the center of
the Work Bowl, rotate and press down until
it rests at the bottom of the Work Bowl.
3
Place ingredients to be processed inside
the Work Bowl. For uniform consistency
of processed foods, cut fruits, vegetables,
and meats into 1-inch pieces.
4
IMPORTANT: Do not process coffee beans or hard spices such as nutmeg, which may
damage the Food Chopper.
ASSEMBLING AND RUNNING THE FOOD CHOPPER
Place the Lid on the Work Bowl with
the Lid Handle facing front. Rotate the
Lid handle to the right. The Lid will click
when locked into place. Rotate the Lid
counterclockwise to lock into place.
5
Slide the Chop/Purée Lever to your desired
setting. Press down on the PULSE/ON
Button to start the Food Chopper.
6
NOTE: The Work Bowl and Lid must be locked into place for the Food Chopper to operate.
W11462553B.indb 6W11462553B.indb 6 05-11-2020 18:56:2005-11-2020 18:56:20