6 | VEGETABLE SHEET CUTTER SAFETY
PREPARING TO PROCESS CUCUMBERS/ZUCCHINI
TIP: The first mark on the food skewer is 4.5"(11.4 cm) from the round skewer base.
1
Rotate lever clockwise to the locked position.
2
Cut cucumber or zucchini to a maximum length of 4.5”
(11.4 cm).
NOTE: Please refer to the “Fruit & Vegetable Prep”chart before processing.
3
Insert the food holder into one end, then the zucchini/
cucumber adapter into the other, using the markings
to align both holder and adapter. Make sure the food
holder and adapter are centered.
4
Place the food and food holder
onto the main body and twist clockwise to lock into
place.
5
Insert the food skewer into the skewer support on the
attachment, making sure it goes all the way through
the vegetable. Make sure there is no gap between
the skewer knob and the skewer support on the main
body.
USING THE VEGETABLE SHEET
CUTTER ATTACHMENT
4
Tighten the attachment knob until the Vegetable Sheet
Cutter attachment is completely secured
to the Stand Mixer.
Book 1.indb 6 5/21/2018 8:13:54 PM
To Next Page
Loading...
