To open the bouncer
Lift the seat support in an upwards motion until it clicks in place. Fig 1.
Insert the end of the toy bar in to the hole at the top of the seat support and
push fully down. Fig 2+3.
Secure in place with the plate and screw. Fig 4.
To select a different height or fold the bouncer
Gently lift the seat support upwards and guide the recline arm in to a different
position or in to the folded position. Ensure the arm is properly seated before
placing a child in the bouncer. Fig 5.
To secure and adjust the harness
Place baby in the bouncer with the crotch strap positioned between his / her
legs.
Fasten the buckles on both sides of the restraint, pressing until you hear a ‘click’.
Adjust the sliders on both straps to achieve a snug but comfortable t.
To release, press the clips on the buckles and remove the harness straps.
Fig 6+7.
Parts list
1. Bouncer frame
2. Toy bar
3. Comfy seat liner
4. Plate and screw
2
3
1
4
To Next Page
Loading...