EasyManuals Logo

KITO EQ series User Manual

KITO EQ series
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
31
Do not use the Friction Clutch to measure the weight of a load.
The use of the Friction Clutch other than intended purpose may result in injury or property damage.
Prohibited
When carrying a lifted load using a lifting magnet or a vacuum chuck, lower the height of the lifted load as
low as possible.
When lifting a load with two electric chain hoists, use the electric chain hoist with the rated lifting capacity
of a single hoist exceeding the load.
When lifting a load with two electric chain hoists, use the electric chain hoists of the same model and
capacity and operate the respective electric chain hoist to keep the load lifted or lowered horizontal.
Failure to comply with this instruction causes bodily injury or loss of property.
Mandatory
CAUTION
In Abnormality or Failure
If the electric chain hoist is damaged or abnormal noise or vibration occurs, stop the operation immediately.
If the electric chain hoist moves in the direction opposite to the indication on the Push Button Switch, stop
the operation immediately.
When the twist, entanglement, crack, deformation, attachment of foreign matters or abnormal engagement
of the Load Chain and the Gear is observed, stop the operation immediately.
When any abnormality is observed during the operation, indicate FAILURE" and contact with the
maintenance engineers.
When the power is interrupted, secure safety and contact with the maintenance engineers.
Failure to comply with these instructions may result in death or serious injury.
Mandatory
Do not impede the lifted load with other structure or wiring.
Failure to comply with this instruction causes bodily injury or loss of property.
Prohibited
If the Load Chain and the hand chain of the geared trolley are entangled, stop the operation immediately and
reset the entangled chains.
Failure to comply with this instruction causes bodily injury or loss of property.
Mandatory
CAUTION
Traverse / Travel
Do not operate the electric chain hoist underneath the load or transport a load over
people. (Fig. I)
Do not operate the electric chain hoist when any person is in the area where
the lifted load moves.
Do not allow people to enter into the area where a lifted load moves.
Do not ride on a lifted load and do not use the electric chain hoist to support,
lift, or transport people. (Fig. J)
Do not strike the stopper or the structure by the main unit or the trolley.
Do not operate or move the electric chain hoist while going backward with a load kept lifted.
Operate the electric chain hoist while looking forward from the back of a load and going ahead.
Failure to comply with these instructions may result in death or serious injury.
Prohibited
I J
How to Use Operation
1
(to be continued)
DANGER
DANGER

Table of Contents

Other manuals for KITO EQ series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KITO EQ series and is the answer not in the manual?

KITO EQ series Specifications

General IconGeneral
BrandKITO
ModelEQ series
CategoryChain Hoists
LanguageEnglish

Related product manuals