Need help?Do you have a question about the Kiwi Technics KiwiSix and is the answer not in the manual?
General| Brand | Kiwi Technics |
|---|---|
| Model | KiwiSix |
| Category | Synthesizer |
| Language | English |
Describes how to set and play chords.
Details Arpeggiator features and clock division.
Explains sequencer functions and clock division.
Explains how tones are selected and stored.
Information on pre-loaded factory tones.
Instructions for chord mode adjustments.
Using Latch Switch for ARP/SEQ modes.
How to apply arpeggiation.
Parameter and division options.
MIDI data reception and panic function.
Setting MIDI channels and general options.
Detailed list of Arp clock division settings.
Setting incoming and outgoing MIDI channels.
Procedures for system reset and updates.
Instructions for dumping tones, parameters, and sequences.
Functions of ARP, MANUAL, and PATCH buttons.
Understanding step display and editing notes.
Important notes when entering edit mode.
Details on Bank buttons 1-8 for editing.
How to load and execute sequences.
Tempo, transpose, and hold pedal interaction.
Procedure to stop the arpeggiator.
Connecting external devices.
Warning about modification risks.
Describes opening the synth and removing keyboard/power panel.
Details wiring the new power plate and MIDI cable.
Steps for disconnecting and removing the original board.
Steps for fitting the new board and reconnecting.
Locating specific jumpers, resistors, and ICs.
Performing the necessary wiring changes.
Steps for component removal and refitting.
Preparing the synth for adjustments.
Adjusting VCF offset and VCA level.
Adjusting VCF EG and Keytrack parameters.
Adjusting headphone and output amp levels.
Details on amp offset and level.
Troubleshooting common issues.
Mod for Saw + PW waveform combination.
Track cut and wire connection for pedal mod.
Steps for removing the PSU and mounting the upgrade.
Completing connections and adjusting voltages.
Details of MIDI messages like Note On/Off.
Overview of Sysex functions.
Details on Sysex header structure.
Requesting and transmitting global/tone data.
Transmitting/receiving tone edit buffer data.
Requesting and transmitting tone data.
Requesting and transmitting sequence data.
Commands for tone names and parameters.
Commands for sequence steps.
To Next Page
