Need help?Do you have a question about the Klark Teknik DN370 and is the answer not in the manual?
General| Frequency Range | 20 Hz to 20 kHz |
|---|---|
| Input Impedance | 10 kΩ |
| Maximum Input Level | +22 dBu |
| Maximum Output Level | +22 dBu |
| THD+N | < 0.05% |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 15 W |
| Equalization Range | ±12 dB |
| Input Connectors | XLR |
| Output Connectors | XLR |
| Frequency Response | 20 Hz to 20 kHz, ±0.5 dB |
| Noise | -90 dBu |
Details on connecting the DN370 to a power source for safe operation.
Guidance on using high-quality twisted-pair audio cables and XLR connector specifications.
Requirements for using high-quality balanced screened twisted pair audio cable.
Details on the 45mm faders for precise adjustment of frequency bands.
Controls for adjusting channel gain and the ±6dB/±12dB range of EQ faders.
Details on sweepable filters for cutting frequencies and suppressing noise.
Guidance on equalising venues for live sound reinforcement.
Using EQ to prevent feedback and shape monitor sound.
Parameters for the 30 bands, tolerance, boost/cut, and filter slopes.
To Next Page
