To Next PageTo Next Page
Need help?Do you have a question about the Klark Teknik DN9650 and is the answer not in the manual?
General| AES50 Ports | 2 |
|---|---|
| Sample Rate | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz |
| Bit Depth | 24-bit |
| Ethernet Port | RJ45 |
| Power Consumption | 12 W |
| Operating Temperature | 0°C to 40°C |
| Audio Formats | MADI |
| Audio Channels | 64 |
| AES50 Channels | 48 |
| Ethernet Ports | 2 |
| Network Interface | Gigabit Ethernet |
| Clock Synchronization | Internal |
| Power Supply | External Power Supply |
| Dimensions | 44 mm |
| Connectors | XLR, RJ45 |
Governs the use of firmware, software, and machine instructions for Midas and Klark Teknik products.
Details regarding third-party software license attribution and notices.
Carefully unpack the DN965X equipment package and inspect for damage.
Install the unit considering ventilation, heat, dust, and vibration for optimal operation.
Isolate and disconnect equipment before moving; consider size and weight.
Explains compliance with FCC rules for Class A digital devices and potential interference.
Discusses potential signal-to-noise ratio degradation in amplitude-modulated electromagnetic fields.
Connect the DN965X to other audio equipment while ensuring all devices are switched off.
Connect the unit to mains power, switch it on/off using the rear switch, and electrically isolate it.
Configure your computer with IP address/netmask and use a web browser to access the DN965X.
Modify the text displayed on the DN965X's LCD screen via the configuration menu.
Configure the settings for fitted network module cards, including clock source and sample frequency.
Explains the DN965X units' function, sample rate conversion, and chassis design.
Visual description of the front and rear panels of the DN9650 model.
Lists supported network modules from Lab X and Audinate, conforming to Cirrus Logic Inc. interfaces.
Visual description of the front and rear panels of the DN9652 model.
Highlights the main features of the DN965X, including rackmount size and networking capabilities.
Details supported audio channels, sampling frequencies, ASRC, and update mechanisms.
Instructions for qualified service personnel to change network modules.
Explains the purpose and content of the operator manual for DN9650/DN9652 units.
Lists trademarks related to Apple Inc. and Microsoft Corporation.
Information on obtaining support and service for Klark Teknik products.
Air intake for internal cooling; must not be obstructed.
Shows Ethernet communication status with a green LED indicating traffic.
LEDs indicating synchronisation and audio activity for AES50 connectors.
Shows status of configured clock source (AES50, ASRC, Network) and stop output clock function.
Shows status of network module connection (synchronised, cable/fibre off).
Shows status of configured clock source (ASRC, Network) and stop output clock function.
Backlit alphanumeric display showing IP address, subnet mask, and user text.
Blue backlight illuminates to indicate that power is on.
Four cut-outs for rack mount fixings.
Air outtake for internal fan cooling; must not be obstructed.
Contains IEC socket, fuse compartment, and on/off switch for mains power connection.
Holds a replaceable network module, requiring approved service personnel for replacement.
Provides 75 ohm connections for external clock synchronization (Black Burst, Word Clock).
Three EtherCon® XLR connectors for audio connections to Midas digital systems or AES-equipped devices.
EtherCon® XLR connector for computer connection for configuration and software upgrade.
Describes configuration via web browser interface on a computer, akin to router setup.
Lists supported operating systems and HTTP-compliant web browsers for configuration.
Modify the text displayed on the DN965X's LCD screen via the configuration menu.
Configure the settings for fitted network module cards, including clock source and sample frequency.
Set parameters like ASRC enabling, word clock output source, and VBB format.
Change the default IP address and netmask for Ethernet networking.
Procedure for transferring and updating software files to the DN965X unit.
Message indicating a successful software transfer and the need for a reboot.
Indicates an invalid update file was selected, requiring re-selection and retry.
Monitors reboot progress messages on the LCD screen after software update.
How to create a MADI split using optical and co-axial connections on the MADI card.
Discusses limitations of using the MADI module for a MADI split configuration.
Provides detailed technical specifications for the DN9650 model.
Provides detailed technical specifications for the DN9652 model.
Signal flow diagram for the DN9650 Network Bridge, showing its internal architecture.
Signal flow diagram for the DN9652 Network Bridge, showing its internal architecture.
Procedure to reset the DN965X unit to its original factory default settings.
Recommendations for monthly maintenance tasks to ensure optimal performance.
Instructions for safely cleaning the unit, including the LCD screen.
Steps for safely checking and replacing the mains fuse of the equipment.
Information regarding special accessories required for compliance with FCC Rules.
Guidelines for installing optional equipment by service personnel.
Information on proper disposal of WEEE (Waste Electrical and Electronic Equipment).
