What to do if Klarstein AeroVital Fry food is still raw?
If your food remains raw after the timer goes off, it could be due to a few reasons. First, avoid overfilling the insert; try frying in smaller batches. Second, the temperature might be too low, so increase it and continue frying. Lastly, the cooking time may be insufficient; increase it and continue frying.
How to make sure my Klarstein AeroVital Fry food is evenly fried?
For evenly fried food in your Klarstein Fryer, some foods may require shaking halfway through the cooking process. Remove the insert mid-cooking, shake the contents to mix them, and then continue frying.
Why is my Klarstein AeroVital Fry Fryer not working?
Your Klarstein Fryer might not be working because the power plug isn't properly inserted into the socket. Ensure it's correctly plugged in. Also, the fryer won't start unless you press the ON/OFF button after setting your desired program, time and temperature. Make sure to press the ON/OFF button.
Why is steam rising from my Klarstein Fryer?
Steam may rise from your Klarstein Fryer if you are frying oily food; this is normal. Also, excessive oil inside the fryer can cause steam, so ensure you clean the inserts after each use to prevent oil buildup.
What to do if the Klarstein Fryer insert is difficult to push in?
If the insert is hard to push into your Klarstein Fryer, it might be too full; ensure the contents do not exceed the maximum mark. Also, check that the insert is correctly aligned and properly inserted into the hot air fryer.
Details on attaching and using the frying container for the hot air fryer.
Instructions for assembling and using the kebab set for doner meat or shashlik.
Guide on inserting the roast/poultry rotisserie skewer into the hot air fryer.
Instructions for correctly inserting the drum basket into the hot air fryer.
Recipe for preparing crispy salmon cubes using the hot air fryer.
To Next Page
General
