20
EN
Put the fat collecting bowl (4) into the
bracket supplied for it in the base of
the appliance, buckle the hole of fat
collecting bowl onto the screw to x it
well (The at col- lecting bowl can be
lled with little water to make it easier
to clean).
Place the grill plate (3) on the base of
the ap- pliance (5). First of all insert the
appliance socket (15) into the opening
intended for it (12), then set the grill
plate horizontally on the appliance
base.
Install the handle (1) to the metal hood
with the screw (e) , gasket (d) and ook
(c). Then place the hood on the grill
plate.
Put the thermometer (18) into the hole
of the grill hood and then x it with
the screw and nut (N) into the back
side of the hood.
To Next Page
Loading...
