Klarstein GrowIt Flex - Page 26

26
EN
1 Place the individual components in the empty container as described below:
• 10 ml of Type A nutrition concentrate
• 1 litre of clear water (up to half the waterline)
• 10 ml of the Type B nutrition concentrate
• 1 litre of clear water (up to the highest waterline).
When relling, proceed as follows:
Concentrate A : Concentrate B : WATER = 1 : 1 : 200
1) Fill in type A nutrition concentrate
2) Fill in half of the clear water
3) Fill in type B nutrition concentrate
4) Fill in half of the clear water
Notes on the concentrates:
(1) To avoid the direct contact of two types of nutrition concentrates (which leads
to sediment forming on the bottom), please note exactly the order of mixing:
Type A nutrition concentrate > half clear water > Type B nutrition concentrate >
half clear water.
(2) The proportion of the mixing ratio is:
Concentrate A : Concentrate B : WATER = 1 : 1 : 200
A high nutrient density corrodes the vegetable roots, a low density reduces
growth.