EasyManua.ls Logo

Klarstein GUSTO CLASSICO - Page 28

Klarstein GUSTO CLASSICO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
EN
Problem Possible cause Suggested solution
The pump makes unusual
noises.
No water in the tank. Fill the tank with water.
The tank does not sit
properly.
Insert the tank correctly.
The espresso is too light. The powder in the sieve
has not been attened.
Press the powder rmly
next time.
Too little powder. Adjust the amount of
powder (see Frequently
Asked Questions).
The powder is too coarse. Use ner powder.
The espresso is too dark. The powder in the sieve
was pressed too hard.
Next time don't squeeze
the powder so hard.
Too much powder. Adjust the amount of
powder (see Frequently
Asked Questions).
The sieve is dirty. Clean the sieve.
The powder is too ne. Use coarser powder.
The device is calcied. Descale the machine (see:
Cleaning and Care).
The sieve holder cannot
be locked properly even
though there is no powder
in the sieve.
The holder is defective. Contact a specialist
company.

Related product manuals