The KLD Guitar Effect Pedal, specifically the FREQ Booster, is a discrete FET preamp pedal designed to enhance guitar tone. It provides a shimmering boost, adding high-end sparkle and definition to the sound. This pedal is based on the classic Xotic EP booster and offers up to 20dB of gain.
Function Description:
The FREQ Booster serves as a guitar effect pedal that boosts the signal, providing a richer and more defined tone. It features two switches for tone customization: a Bass Boost and a Bright switch. The default setting is Bright on/Bass Boost off, which is ideal for darker-sounding instruments, adding extra sparkle and shimmer. Engaging the Bass Boost adds a suitable amount of low end, particularly useful for single-coil pickups to maintain their presence. Turning off the Bright Switch allows for a full-frequency boost that is transparent, preserving the original character of the instrument's sound.
Important Technical Specifications:
- Type: Discrete FET preamp pedal
- Output: Low impedance
- Gain: Up to 20dB
- Power Consumption: 9VDC/5mA
- Battery Type: 9VDC (006P) x 1 (not included)
- External Power Source: Standard barrel plug 2.1mm x 10 mm DC-1
- Input Impedance: 1M ohm
- Output Impedance (min): 2K ohm
- Output Level (max): 0 dBm
- Dimensions (W/D/H): 4.8" x 3.4" x 2" (123mm x 85mm x 50mm)
- Weight: 0.69kg
- Construction: Strong, virtually indestructible steel enclosure
- Circuit Board: Military-spec glass-epoxy PCB
- Bypass: True Bypass design
Usage Features:
- Volume Control: Allows adjustment of the output level.
- Tone Customization Switches:
- Bass Boost: Adds low-end frequencies.
- Bright Switch: Adds high-end sparkle and definition.
- Toggle Switch: "Earth and sky" toggles switch for easy ON/OFF control of bass and bright features.
- Footswitch: Heavy-duty, industrial footswitch for engaging/disengaging the effect.
- Sloped Face: Designed for easy stomping during live performance.
- LED Indicator: On/Off LED to show the pedal's status.
- Handmade Construction: 100% hand-made for quality assurance.
- Battery Compartment: No tools required for battery access.
Maintenance Features:
- Battery Disconnection: When storing the unit for long periods, disconnect the battery to prevent drainage and potential damage.
- External Power Source: It is recommended to use the KLD Guitar adapter when using an external power source.
- Screw Integrity: Do not remove the screws on the bottom of the pedal.
- Instrument Disconnection: Unplug the instrument from the pedal when not in use to conserve battery life and prevent unwanted signal flow.
- Battery Life Indicator: A noticeable loss of level and distortion indicates that the battery is running low and needs replacement.
Need help?
General
To Next Page