10
OPERATING INSTRUCTIONS
CHARGING THE CASE
Open the USB-C Port Cover
7
and insert the USB-C end of the included
charging cable
10
into the USB-C Port
8
of the charging case. Connect
the USB-A end of the cable into an appropriate charging source (not
included, see GENERAL SPECIFICATIONS section).
While the case is charging (0% to 99%), the Charging Case LED
6
will
breathe red (dim to bright). Once the case is fully charged (100%), the
Charging Case LED
6
will turn green.
CHARGING THE EARBUDS
Provided the charging case has been charged, open the Charging Case
cover
5
and place the earbuds in their respective slots. The Charging
Case LED
6
will flash white indicating the earbuds are successfully
charging, and will stop flashing once fully charged.
ENGLISH
To Next Page
Loading...
Need help?
General
