Klipsch KG-300 - Pair the Headphone and Transmitter; Initiate Transmitter Pairing; Initiate Headphone Pairing; Confirm Pairing Completion

PAIR THE HEADPHONE AND THE TRANSMITTER (IF NECESSARY)
A
B
A
B
The headphones and transmitter come pre-paired. If they become unpaired follow these steps.
1. Press and hold the power button(B) on the transmitter until the LED(A) begins flashing blue.
2. Press and hold the power button(B) on the KG-300 u ntil th e LED(A) begins flashing blue.
3. When pairing is complete the LEDs on both will turn solid blue.
A. Power LED
Solid Blue = PAIRED
Flashing Blue = PAIRING MODE
B. Power Button