Klipsch KMC 3 - Music Sources; Pairing Bluetooth Devices

MUSIC SOURCES
Any paired
Bluetooth
device within a
30
foot
(9.1
m)
range
of
the
KMC
3 can
wirelessly
stream music.
Any device with a standard 3.5mm headphone
output
can
be
connected
to
the
AUX
input (on back) with a mini-to-mini
connecting
cable
(included).
Once
connected, make sure
volume
on
KMC
3
is
just
above minimum, adjust volume on
your
device
to
maximum and
play
music.
Use
SOURCE
SELECT
to
switch
to
AUX
input
if
necessary. Adjust
volume up
to
desired
level.
PAIRING BLUETOOTH DEVICES
Touch the 8/uetooth button
on
unit down until
it
begins
to
flash
(approximately
3 seconds).
Do
not touch any other buttons
on
the
KMC
3
or
its remote during this process.
While
the
8/uetooth
button
flashes blue,
activate the
8/uetooth feature on your
music device
or
phone, setting
it
up
to
pair with "Kiipsch
KMC
3". Once paired, the
KMC
3
will automatically select
8/uetooth
as
the source. First, adjust the volume
of
the
KMC
3
to
the below
illustrated range for optimum performance.
Then, while streaming
music from your device, adjust the device volume
to
desired level.
'\
I/
II
'\
+
-