Need help?Do you have a question about the Klipsch Reference R-800F and is the answer not in the manual?
General| Sensitivity | 98dB @ 2.83V / 1m |
|---|---|
| Nominal Impedance | 8 ohms compatible |
| Enclosure Material | MDF |
| Frequency Response | 35Hz - 21kHz |
| High Frequency Driver | 1" Titanium |
| Low Frequency Driver | 8" |
| Enclosure Type | Bass-reflex |
| Inputs | Single binding post |
| Finish | Ebony, Walnut |
| Power Handling | 150W / 600W |
Instructions for installing feet and accessories on floorstanding speakers before use.
Positioning front left/right speakers for optimal stereo imaging and listening distance.
Guidance for placing center speakers near the screen for clear dialogue reproduction.
Recommendations for placing rear surround speakers for immersive audio and ambience.
Steps for connecting speakers to amplifier using speaker wire, ensuring correct polarity.
Information on speaker efficiency, impedance, and safe usage with amplifiers.
Diagram and guidance for configuring Dolby Atmos speakers in a listening environment.
To Next Page