Klipsch WA-2 - Warranty - U.S. and Canada

wireless products. If other wireless devices in the area have a manual
channel selection option, you can also select a different channel for
their operation to help eliminate interference with the WA-2.
• If you do not get a signal, or get a low level audio signal from the
subwoofer, make sure the subwoofer out level control on your surround
receiver is set correctly (usually at the halfway point sometimes labeled
"OdB"). If your subwoofer out level on your surround receiver is correct,
and you have adjusted the subwoofer volume level and the signal is
still too low, move the gain control "A" to the right ( + 12dB) to increase
the signal to the subwoofer. If the signal is too high, move the gain
control to the left ( -12dB) to reduce signal strength.
WARRANTY - U.S. AND CANADA
KLIPSCH warrants to the original retail purchaser that this product is to
be free from defective materials and workmanship for a period of two (2)
years from the date of purchase, if it is properly used and maintained. If this
product proves defective in either material or workmanship, KLIPSCH, at its
option, will (a) repair the product, or (b) replace the product, at no charge
for parts or labor. If the product model is no longer available and cannot be
repaired effectively or replaced with an identical model, KLIPSCH at its sole
option may replace the unit with a current model of equal or greater value.
In some cases, modification to the mounting surface may be required where
a new model is substituted. KLIPSCH assumes no responsibility or liability
for such modification. To obtain a repair or replacement under the terms of
this warranty, please return to dealer first, if possible, and they will direct
you accordingly for repairs or replacement. You will be required to submit a
copy of the original receipt.